We Discovered This Great Site for Lacing Methods!

Lacing your skates to fit your individual skating needs seems to be something that most Derby Girls (and Refs) learn over time.  It's usually a hit or miss "try it and see if it works" kind of process.  It can be difficult to take advice from team mates and friends because different skaters may be looking for different things in the way they lace their skates.

For me personally, I have to adjust the laces very tightly over the middle instep of my right foot when I know I'll be skating lots of laps or very intensely for a longer period because the boot is a little wide on my right skate and my foot tends to slide around in the boot as I skate. I know other team mates that need their skates to be loose in the toe box and tight around the ankle, or vice versa.

This site has 43 different ways to try lacing! With diagrams and feedback for each style.

Screen Capture from "Ian's Shoelace Site"

One team mate has already tried lacing her skates differently based on the tips and instructions given here. I plan to experiment soon! Let us know if you try and love any particular style of lacing...

- Nikki Tesla #134

From Freshmeat to Team Mate: Getting My Gear - Part 2!

In my last post, I talked about picking out most of my basic safety gear.  Today, I want to focus in on finishing my discussion of Derby gear by talking about what I think may be the most important pieces of all - the mouthguard and SKATES!

When I started freshmeat training, one of the first requirements was that we had to have a mouthguard.  So, of course, I ran out to Dick's and grabbed a cheap mouthguard - one of those big clunky ones that hockey players use.  I hated it.  Absolutely hated it.  I'd forgotten how much I'd hated wearing one when I played soccer years ago.  It made it hard to breathe, I had to constantly think about holding it in my mouth, and because it had some rough edges and I have a smaller mouth, it actually tore up the insides of my upper lip and gave me painful cuts.  Not fun.

MoJo wearing her Sisu Mouthguard

In talking to just about everyone else on the team, I learned that almost EVERYONE uses SISU mouthguards.  I ordered one online right away and when it came and I tried it, OMG the difference was immediate and amazing.  These mouthguards are so thin that I put it on and pretty much forget it's there.  I never have to worry about it coming off mid-practice and not only can I drink water with it in, but I can almost talk normally... so great.  I HIGHLY recommend them! For more info about actually getting and forming a SISU mouthguard, you should check out the post one of our other skaters, MoJo, did when she got her new SISU mouthguard.

The final piece of my "freshmeat" gear package was, of course, my very own skates! When I went up to Bruised Boutique in New Hampshire, I had no real idea what I was looking for in skates, only that I had a basic price range I was trying to stay within.  As a brand-new skater, I didn't want to spend more than two hundred dollars on my skates in case a year from now I decided Derby wasn't for me.  What's great about going to Bruised is that armed with only that price range to start with, I was able to go and try on several different styles of skates to see what I liked.  I have to admit that trying them on was sort of like shopping for my wedding dress years ago, once I tried the right pair on, I just knew.  They felt right...at least then.

Sure Grip Rebel Fugitives. 

What I went with were Sure Grip Rebel Fugitives. I could list off the specs for you, but that's really not at all why I chose them. I put them on and they felt cushy in all the right places.  They didn't feel too tight and I could go up on the toe stops comfortably.  They felt great. In finishing my freshmeat training and taking my Level One test, they were such a step up from the sneaker skates I'd been skating on originally that they felt like a dream.

Months later, though, gearing up to pass my Level Two test, and skating more and more in real drills with our rostered skaters, I can identify now some of the things I'd like to change when I get my next pair of skates.  And yes, it's only been about four months, but I've already started falling into the Derby trap of dreaming about my next gear upgrade. LOL.

It was only through practical experience and lots and lots of laps that I realized the cushy boots on these skates are a little too wide for me.  My right foot slides around inside the boot giving me wicked cramps if I don't lace my boot almost tight enough to cut off the circulation on that side.  Any practice nights where we do lots of lateral movement also creates the same sliding/cramping issue.  Most of the time, though, they're survivable.  I've started experimenting with lacing them differently

My skates with the Radar Bullets
and upgraded toe stops (Gumballs).

to see if it makes a difference.  The next time I go to do a lap test I may also try wearing double socks, I'm not sure.  It's all still a learning process for me.

In fact, in the last two weeks, I've started trying out different wheels to see how that affects my skating.  My skates originally came with 92 Fugitives, which are a fairly grippy wheel, highly recommended for freshmeat skaters.  When just learning all the basic skills they worked well.  As I've been tackling more advanced skills, though, I realized that combined with our wooden indoor roller rink floor, my Fugitives were maybe a little too grippy for some things.  One of our co-captains, Suga Burn, lent me a pair of her wheels, 97 Radar Bullets and the difference they've made in trying to do things like plow stops has been amazing!

My skates with the original
Fugitives in a wheel bag.

When I go to do laps with the 97s on, though, I'm having a new problem and am feeling SO slippery that I tend to slide out all over the place.  Hopefully, Astra will be lending me her 93 Radar Bullets soon and I'm going to try to put those on as "pusher wheels," keeping some 97s, and get some grip mixed in that way, allowing me to do things like plow stop but also hold tight through turns.  Until I have really figured out exactly what type of Derby skater I'm going to be and what I will need from my skates, I feel like there's going to be a lot of trial and error in learning about boots, wheels, plates, and other skate parts and how they can change the feel when you skate.

Since I probably won't spend another couple hundred dollars on new skates anytime soon, at least finding a potential upgrade in my wheels is a better, less expensive way to up my game without breaking the bank.  I really wish there was a place you could go to just try on different wheels and sort of "test drive" them like you would a car before buying, but for now I can borrow some skaters' extra wheels and narrow options down a little bit that way!

Until next time...
Nikki Tesla #134 

From Freshmeat to Team Mate: Getting My Gear!

Last post, I mentioned that I would tell you all about picking out my own gear.  In the process of drafting, I realized that this is probably going to have to be broken into several posts.  There's just too many things to talk about! Today, we'll start with picking out the required safety gear.

Since our team's in Western Massachusetts, there are only a couple of options for places that you can go and actually try on Derby gear before purchasing.  There's the Pro Shop at Ron A Roll Skating Center in Vernon, CT, though they only have a small selection of Derby gear in stock.  You can pick up hockey helmets at most sporting goods stores like Dicks or Modells, and some skateboard shops like Theory Skateboarding carry a small variety of knee and elbow pads that can be used for Derby. For most of us in Southern New England, though, the best place to go and get gear is definitely at Bruised Boutique in NH.

An interior shot of the Bruised Boutique store in NH. 

Bruised Boutique is the world's largest Derby store and is the only one is the area that is devoted to just Derby gear and accessories.  It's almost a rite of passage for Derby skaters in our area to go with a veteran team mate to pick out their first set of gear. I was lucky enough that within the first six weeks of my Freshmeat period, my awesome coworker who you know as Duck N. Shover (who writes our "Officials' Review" posts) and his lovely wife, Astra Knot, who also happens to be our Team's 2014 Chairperson were willing to take me to Bruised to get my gear.

A few days before we actually drove up there, I spent some time checking out their online store trying to make a list of things I desperately needed and trying to figure out exactly how much I was willing to spend.  I quizzed other POD skaters to see what they loved about their gear and what items they would swap out if they could.  I knew, no matter what, that I had to buy at least the essentials: A helmet, elbow pads, wristguards, knee pads, a mouthguard, and the ultimate - SKATES! The question was, should I buy cheaper "freshmeat" versions of the gear, or should I invest now in better equipment?

As a Derby skater, I want to have fun, of course, but I'm also really concerned with being safe.  It was very important to me that I get a decent helmet to protect my head, especially since I knew I'd still be falling a lot. Derby skaters are starting to be very cognizant of the importance that Derby helmets be rated for multiple impacts since we do fall and protecting the head is a number one priority when playing.  In fact, many players are actually switching over to hockey helmets which are designedto be even safer, but for my first helmet, I wanted one that would be safe and also look pretty. I'm not afraid to admit it.  I went with a Triple 8 helmet in purple since that's our team color.  The foam padding on the inside is also removable for washing which is a great feature to help keep it from getting stinky!

Next, I focused on knee pads.  Knowing that I was still falling a LOT in practice, I wanted to get really good knee pads.  This was a place that I was happy to spend a little extra money to get better equipment.  Now, Derby knee pads all pretty thick and sturdy, but as I mentioned before, they also have a hard shell on the front and this feature can vary from pad to pad.  When I was using the Freshmeat gear, I had been using a pair of 187 knee pads, which I liked a lot.  I knew I wanted to stick with that brand, but they make different kinds, so I researched how they differed.  I decided to go with their most expensive type - the 187 Pro Derby Knee Pads - because they have removable, replaceable shells on the front.  This set is about ten dollars more than the regular ones, but when you fall several times really hard on your knee pads and finally crack one of the shells, rather than having to replace the whole set of knee pads, you can just buy the replacement shells for the front. It can save some decent money in the long run.

For elbow pads and wristguards, I was less concerned with getting top of the line gear.  Personally, I feel

like while you absolutely need these items, you should be way more concerned with your knee pads since you do the hardest falling onto those.  I could spend a little less here.  Mostly it was about fit and comfort.  I tried on a couple of brands for the elbow pads and found that some of them had different shapes for the hard shells on the elbow.  I really liked the flatter shape of the Triple 8 pads, as opposed to some of the ones that felt more like cups, and so went with those.  In the wristguards, there are several different styles, as well.  Some are one solid piece that slides over the wrist and then has a strap to hold it in
place.  The ones I chose open flat so that you can place your wrist into it then tighten the three different straps (one on your hand, one on the small of your wrist, and one on the beginning of your forearm) to hold it in place.  I felt like I had more control in adjusting the tightness in these three different spots to get the most safety and comfort out of the guards. Since these Triple 8 ones were some of the cheapest in the store, I'm already noticing wear and tear on them. I may have to get replacements soon, but I think I'm going to stick with the same kind when I do.

Next time, I want to finish up with safety gear and tell you about getting my very own skates!

Until then...
Nikki Tesla #134 

From Freshmeat to Team Mate: Falling Down and Getting Back Up Again

Great illustration by Dusty Melling! 

So, one of the best known things about Derby is Falling.  Whether it's because you lost your own balance or because someone else hit you, you will fall down. A lot.  When I joined the team, one of the first things anyone ever said to me is "Mentally prepare yourself. You will be falling a lot. A lot.  Most of the time, though, it's okay and doesn't even hurt."  At first I was skeptical, but outside of a really bad hit, they were
right.

In Derby, you fall down.  You fall down a lot.  BUT... you also learn how to fall and with your pads and the right technique, nine times out of ten, you really don't feel it!

You may be skeptical, but those pads really do make a HUGE difference.  I had no idea, having never seen any up close before gearing up from the freshmeat bag, but derby knee pads about three inches thick with a hard shell on the front.  When you fall properly on to these pads, landing on the shell, not only do you get a really good cushion, but you should theoretically slide a little on the floor, which also helps to distribute the impact.

The 187 Killer Pads Pro Derby knee  pads
that I bought at Bruised Boutique. 

Now, coupling these nice, thick pads with a proper falling technique is the ultimate goal.  In Derby, we now refer to learning the art of falling down and getting up again as learning RECOVERY.  The focus is on acknowledging that you will fall and learning the best ways to control it and then to get up again as quickly as possible.  You do not want to make yourself a target for other players (or even refs) to fall over on the track!

Though there are several different types of "recoveries" that you learn and get tested on in Derby, the one thing they all have in common is that they involve falling forward.  While as I mentioned in a previous post, that all players are required to wear helmets, mouthguards, elbow pads, knee pads, and wristguards, there are no rules about any other equipment.  There are players that wear padded shorts to protect their tailbones in accidental backwards falls, but the general practice is to learn to fall forward so that you will be protected by the required gear.  Thus, as a freshmeat skater, you will spend at LEAST one practice on learning the three basic fall "recoveries." (I know I did. This practice WIPED ME OUT!) You will learn:

*Single Knee Taps - These are honestly my least favorite, though probably the most useful in a game situation. The idea here is to recognize when you are losing your balance, and to just tap your knee, one or the other, on the floor long enough to help stabilize you then pop back up to full skating, without touching the floor with your hands (Fingers make excellent targets for other skaters' wheels...).  Easier said than done, LOL. Originally we practiced these by skating back and forth up and down the rink just alternating knees on the floor.  My quads were screaming! I also could only do about three or four before I'd lose my balance completely and need to reset before doing any more.  Having practiced these for months now, though, I can say that doing one for the purpose it's truly intended is both useful and much easier than it was when I first started.

One of POD's skaters landing in a double knee slide
during a bout with Elm City.  

*Double Knee Slide - This is sometimes referred to as the "rock star slide." Here, again, you should

Here's a pic from a game we had with the Elm City team.
See how the Elm City player on the left has positioned
her legs to recover to standing? *We just try not to use
our hands like this...

recognize that you are on your way to the floor..Then the best practice is to squat so that you are already halfway to the floor and then allow yourself to land on both knees and slide forward.  Ideally, you should land on your knees in a staggered motion, not at the same time, which helps to lesson the direct impact on your knee joints.  You also should keep your arms up and close to your chest to avoid either landing on your own hands/fingers or potentially creating a smooshed finger situation if someone else rolls over your fingers on the track.  To recover from this type of slide, you then bring one knee up, creating a 90 degree angle with the track and use the leverage pushing on that skate (and your quad muscles in that leg) to propel you up again to regular skating position.

*Four Point Fall - This final fall and recovery is both the easiest in a way and the toughest.  This is a full fledged fall to the ground.  It is called a four point fall because four parts of your body should land on the floor if you do it properly.  Again you should be able to recognize that you will fall. Then, the goal is to first fall on to the knees as if you are doing a double knee slide (points one and two) and then to continue falling onto your forearms (points three and four). Hands should be fisted and arms bent at a ninety degree angle so that you land on the flat of your forearms with your thumbs on the top of your fists.  Your head should be tucked down near the forearms, but not between them, so that you are both protecting your head if another player trips on you, but you are not smashing your face on the ground. Recovery builds on the same principles as the earlier falls - bring upper torso upright, then bring up one knee, brace and lift to skating
position.

A POD player lands in a four point fall during a game,
tucking in to avoid injury. 

The best principles for Recovery in Derby, no matter how you fall, are to FALL SMALL and to RECOVER, RECOVER, RECOVER (ie. get up quick!) The less time you spend down on the track, the better for all players involved.  You are much less likely to get accidentally run over and if you're like me, you want to be back in the action! So, falling safely, making yourself a small target, and then getting up and back in the game as quickly as possible are things that we actually practice because you know that you'll be doing them in a game.  Even the best Derby players fall.  They just fall better than the rest of us. *grins*

Now that we've talked about falling and recovery, I suppose I should go a little more in depth about my safety gear!  Next time, I'll talk all about how I picked out my skates and such up at the Bruised Boutique in New Hampshire. It's an awesome derby gear store.

Until next time...
Nikki Tesla #134 

Game Changer or Mood changer?

Game Changer? or Mood Changer?    I think I will say the Sisu 2.4 mouth guard is a little of both.  Ya maybe it will be a game changer - I HOPE.  But I know for sure it is a mood changer! I was SOOO happy to get my new mouth guard.  I jumped for joy when it arrived in the mail. Then I opened it up and popped it in the hot water.  (you can see some pix of the process below)  After trying a couple times to get it to feel right,  I tried for the 3rd time.  Third times the charm right?   I was happy to feel how well it molded to my mouth.  It didn't dig into my lips or feel bad in any way.   So I went to take it out... well, that proved to be a huge challenge.  The mouth guard fit SOO Well that it would NOT come out! I tried and tried and it would not budge.  My happiness turned to slight panic.  After some thoughts of cutting it out of my mouth or having to go to a dentist (LOL) I came to my senses and decided to flush my mouth with the hottest tap water I could stand.  I softened the guard enough to unbend the front where it had shaped so perfectly over the front of my teeth/gums.  It finally came out!    

So my mood was no longer very happy at this point...  I was quite annoyed.  So I tried again and again and again... and...    Do I look a little Krazy here?  You bet I do.   This is what happens when you are on your 7th, 8th, 9th try at molding your mouth guard!   You get a bit nutty.  

I said,  damn this Freaking Game Changer!  My son said, it's not a game changer, it's a mood changer - hense the title to this blog!   I said yes!  I started out so happy and now I was so frustrated bordering on pissed off.

So anyway,   here are some of my "in the process" pix.  At least the white guard turns clear in the hot water, which was nice, because it lets you know when it is ready to be molded.   I used a wider spatula so that it would not bend over and possibly touch itself.   Didn't want it to stick to itself, that would not be good.  

Here it is soft, pliable & ready to go for the 100th freaking time  ;)   

 

Put it in and pressed on the lips,  Looks good,  feels good too. 

Had to go through this process many times because it would fit so perfectly over the top part of my teeth/gums that it would literally be stuck in place because it molded inward so could not come back off over my teeth.   I had to do the hot water removal a few more times.   

This last time I didn't suction my lips as much as they tell you to do.  I didn't push in on my lips to mold it as much either.   Then as it was almost cooled I pulled on the top to make sure it was not molded too much around the top of my gums, put it up and down a few times too and....  FINALLY it fits !

I can actually REMOVE IT!!  (without hot water)

Yeay!   Now this thing BETTER be a game changer in a POSITIVE way....  I hope the holes do not act like a cheese grater on my lip if I get hit.   I'm concerned cause it really does feel very rough! 

We shall see  :)

UPDATE :   I really like the Mouth guard.  Although I did change from the thicker 2.4 one to the thinner 1.6 one.   The thicker guard just would not fit right and was impossible to mold and still remove from my mouth.  The thin guard is wonderful.  it pops in and is tight fitting.  Comes out quick with a tug.    Did grate my mouth a couple of times, but not THAT badly.  Would definitely get it again.

Author:

MoJo